Specifications:
ITEM | DESCRIPTION |
Modules | chip | RTK GNSS Modules |
mode | BDS B1I/B2I/B3I、GPS L1/L2/L5、GLONASS L1/L2、Galileo E1/ E5a/E5b、QZSS L1/L2/L5、SBAS |
| frequency | 1408 aisle,Based on NebulasIV |
| signal | BDS B1I/B2I/B3I GPS L1C/A/L2P (Y)/L2C/L5 GLONASS L1/L2 Galileo E1/E5a/E5b QZSS L1/L2/L5 |
Accuracy | Single point positioning (RMS) | flat:1.5 m |
|
| Elevation:2.5 m |
| DGPS (RMS) | flat:0.4 m |
|
| Elevation:0.8 m |
| RTK (RMS) | flat:0.8 cm+1 ppm |
|
| Elevation:1.5 cm+1 ppm |
| Single point positioning (RMS) | BDS | GPS | GLONASS | Galileo |
| B1I/B1C/L1C/L1C/A/G1/E1 Pseudorange | 10cm | 10cm | 10cm | 10cm |
| B1I/B1C/L1C/L1C/A/G1/E1 Carrier Phase | 1mm | 1mm | 1mm | 1mm |
| B2I/B2a/B2b/L5/E5a/E5b Pseudorange | 10cm | 10cm | 10cm | 10cm |
| B2I/B2a/B2b/L5/E5a/E5b Carrier Phase | 1mm | 1mm | 1mm | 1mm |
| B3I/L2P(Y)/L2C/G2 Pseudorange | 10cm | 10cm | 10cm | 10cm |
| B3I/L2P(Y)/L2C/G2 Carrier Phase | 1mm | 1mm | 1mm | 1mm |
| Time accuracy (RMS) | 20ns |
Orientation accuracy (RMS) | 0.2° /1 m baseline |
| Speed accuracy (RMS) | 0.3m/s |
Startup time | Cold Start | <30 s |
| Initialization time | <5 s ( Typical Value ) |
| Initialization reliability | >99.9% |
Output Data | Data update rate | Dual antenna 20Hz |
| Differential data | 20Hz Raw data output |
| data format | RTCM V3.X |
| Baud rate | NMEA-0183, Unicore |
Power consumption | Voltage | DC3.6V-6.0V,typical:5.0V |
| Current | 1.6W |
Physical parameters | Size | 43*30*10.8mm |
| Weight | 14.5g |
| Connectors | 1.25 spacing 8pinSeat |
environment | Operating temperature | -40 °C ~ +85°C |
| Storage temperature | -40°C ~ +105°C |
Indicator Lights | PWR lamp | The red light is always on when the power is turned on, indicating that there is power input |
| TX lamp | The blue light flashes when powered on, indicating that the port has data output |
| PPS lamp | If not positioned, the light is off; after 3D positioning, the blue light flashes |
| RTK lamp | If the mobile terminal does not enter RTK mode, the light is off; if it enters RTK Fixed mode, the blue light is always on. The base station does not light up regardless of any status. |
PVT lamp | Always on during positioning |
Please contact us to obtain the detailed specifications for this product.